Camo Lead Coating Powder

The easy way to create your own coating for all of your leads and non-toxic fishing weights.

3 colours available: Green, Brown and Grey in Smooth or Textured finish. Use as is or blend your own unique colours by mixing combinations.

Directions for Use (Smooth Powders):
Using a pair of pliers, heat the lead over a naked flame until hot enough for the powder to melt onto it. Roll the lead in the powder until it is evenly covered. Hang the lead off a paper clip and bake in a 200°C oven for 5 minutes, to cure the coating. Using pliers, plunge it into water to cool and harden the coating.

Directions for Use (Textured Powders):
Using a pair of pliers, heat the lead over a naked flame until hot enough for the powder to melt onto it. Roll the lead in the powder until it is evenly covered. Hang the lead off a paper clip and bake in a 200°C oven for 5 minutes, to cure the coating. Repeat this process without curing a second time. Then Using pliers, plunge it into water to cool and harden the coating.

Warning: take care not to burn yourself when using this product.