If you’re looking for super stiff high memory monofilament for use with Hinged Stiff rigs, Chod rigs, Clones and even Combi-Rigs then Trip Wire is the perfect material!
Not only does it offer superb knot and tensile strength but it also has an extremely high memory that ensures that the hooklink or hook section retains any curve you wish to form (or stays straight if needed).
Trip Wire is clear, which means it works superbly on all lake beds or in/on weed.
*For more information on how to use Trip Wire click on the video tab above.
- Available on 20m spools in 15lb, 20lb & 25lb.
- Colour: Clear.
| Breaking Strain | Diameter | Meterage |
| 6.8kg (15lb) | 0.41mm | 20m |
| 9.1kg (20lb) | 0.47mm | 20m |
| 11.3kg (25lb) | 0.51mm | 20m |
‘Hinged Stiff/Chod Rig’ step by step guide:
-
- What you’ll need
-
- 1. Start off by threading the Trip Wire through the eye of a Chod Hook this way
-
- 2. Create a loop – it may need to be larger so you can whip it up the hook shank
-
- 3. When it comes to drawing out excess material from the knot pull the loose tag end first and then the hooklink side
-
- 4. When tightening the knot fully stop the hook link being marked by the eye by drawing the knot tight over the end of your thumb
-
- 5. thread on a small Covert rig ring and pass the tag end back through the eye of the hook
-
- 6. Trim excess material off the tag and blob back so you are left with a small neat D…
-
- 7. …that should look like this. Perfect!
-
- 8. If your tying up a choddy use a simple 3 turn blood knot with the tag blobbed to attach a size 12 Covert Flexi-Ring Swivel
-
- 9. Theres various opinions on how curved the end section should be, but we like it just about like this
-
- The finished rigs
Reviews
There are no reviews yet.