The completed Horton Rig underwater

The completed Horton Rig underwater.

Step 1. Strip off 20cm of 35lb Ultra Skin.

Step 1. Strip off 20cm of 35lb Ultra Skin.

Step 2. Double over the hooklink and thread through the hook eye.

Step 2. Double over the hooklink and thread it through the hook eye and then add a Target Rig Swivel.

Step 3. Pass the loop carefully over the point of the hook (Multi Rig style).

Step 3. Pass the loop carefully over the point of the hook (Multi Rig style).

Step 4. The looped section should be about this long, the top of the loop should be level with the barb of the hook.

Step 4. The looped section should be about this long, the top of the loop should be level with the barb of the hook.

Step 5. Using the hooklink section over whip a long knotless knot (approx 21 turns).

Step 5. Using the hooklink section over whip a long knotless knot (approx 21 turns).

Step 6. The final step is putting a Covert Hook Aligner on to control the way the hook flips.

Step 6. The final step is putting a Covert Hook Aligner on to control the way the hook flips.

Step 7. The completed Horton Rig.

Step 7. The completed Horton Rig