Specialist Mag-Aligner Rig

Specialist Mag-Aligner Rig

What you’ll need...

What you’ll need…

Step 1. Strip the coating off 16 inches of Target Gravel Speciskin using a Gardner

Step 1. Strip the coating off 16 inches of Target Gravel Speciskin using a Gardner ‘Peel & Pull’ Stripper Tool.

Step 2. Tie a size 12 Covert Mugga on with a knotless knot and ‘blob’ the tag end (optional).

Step 2. Tie a size 12 Covert Mugga on with a knotless knot and ‘blob’ the tag end (optional).

Step 3. Using a sewing needle pierce the rubber grub (orientation as shown) and carefully thread it onto your hooklink.

Step 3. Using a sewing needle pierce the rubber grub (orientation as shown) and carefully thread it onto your hooklink.

Step 4. Push the grub over the hook eye. Test it’s lined up correctly by gently drawing the hooklink over your finger. The hook should flip over.

Step 4. Push the grub over the hook eye. Test it’s lined up correctly by gently drawing the hooklink over your finger. The hook should flip over.

Step 5. Carefully nick two maggots onto the hook.

Step 5. Carefully nick two maggots onto the hook.

Step 6. The finished rig with the hook bait hooked onto the Micromesh PVA to avoid tangles.

Step 6. The finished rig with the hook bait hooked onto the Micromesh PVA to avoid tangles.

November 20th, 2015|Categories: Rig Tying, Specialist Rig Tying|0 Comments

Leave A Comment