Mohawk Rig

What you need...

What you need…

Step 1. Tie a small size 16 Target Specimen Hook to the length of Trickster braid using your prefered knot.

Step 1. Tie a small size 16 Target Specimen Hook to the length of Trickster braid using your prefered knot.

Step 2. Pierce a piece of bouyant Enterprise Tackle imitation corn through the narrow end first with a baiting needle as shown.

Step 2. Pierce a piece of bouyant Enterprise Tackle imitation corn through the narrow end first with a baiting needle as shown.

Step 3. Thread the corn down the hook length and push the small hook into the fat end of the corn.

Step 3. Thread the corn down the hook length and push the small hook into the fat end of the corn.

Step 4. Taking a size 10 target Specimen Hook tie a standard knotless knot as shown, so the peice of corn sits straight off the back of the hook shank.

Step 4. Taking a size 10 target Specimen Hook tie a standard knotless knot as shown, so the peice of corn sits straight off the back of the hook shank.

Step 5. Carefully withdraw the small hook from the corn and hook on three maggots. carfully push the hook point back into the corn.

Step 5. Carefully withdraw the small hook from the corn and hook on three maggots. carefully push the hook point back into the corn.

Step 6. The finished rig with a small groundbait stick threaded onto the hooklink.

Step 6. The finished rig with a small groundbait stick threaded onto the hooklink.

January 22nd, 2014|Categories: Rig Tying, Specialist Rig Tying|0 Comments

Leave A Comment