CM Pop Up Rig

What you

What you’ll need…

Step 1. Using a Peel and Pull stripper tool remove around 3 inches of coating.

Step 1. Using a Peel and Pull stripper tool remove around 3 inches of coating.

Step 2. Tie a small loop in the end of the stripped braid and attach a 12mm pop-up.

Step 2. Tie a small loop in the end of the stripped braid and attach a 12mm pop-up.

Step 3. Secure the pop-up to a size 8 Covert Continental Mugga using a knotless-knot. Ensure that the pop up is positioned at the start of the bend..

Step 3. Secure the pop-up to a size 8 Covert Continental Mugga using a knotless-knot. Ensure that the pop up is positioned at the start of the bend.

Step 4. Slide a fairly long length of Covert Supa Shrink on to the rig and position as pictured to trap the bait tight to the shank of the hook.

Step 4. Slide a fairly long length of Covert Supa Shrink on to the rig and position as pictured to trap the bait tight to the shank of the hook.

Step 5. Tie a figure of eight loop knot in the end of the rig for easy attachment to a Kwik Lock Swivel.

Step 5. Tie a figure of eight loop knot in the end of the rig for easy attachment to a Kwik Lok Swivel.

Step 6. Attach a blob of Critical Mass putty to balance the pop up.

Step 6. Attach a blob of Critical Mass Putty to balance the pop up.

Step 7. Tom’s finished rig ready to go.

Step 7. Tom’s finished rig ready to go.

January 22nd, 2014|Categories: Carp Rig Tying, Rig Tying|0 Comments

Leave A Comment